Toyota Corolla Tire Pressure
Most Toyota Corolla Hybrid LE models use 35–38 PSI in the front and 33–36 PSI in the rear, depending on model year and tire size.
Recommended Tire Pressure (Cold)
Always check on cold tires (parked 3+ hours). Verify on driver-side door jamb sticker.
All data is for informational purposes only. Always refer to your vehicle's owner's manual for the correct tire pressure.
Tire Pressure by Tire Size
| Tire Size | Front PSI | Rear PSI |
|---|---|---|
| 195/65R15 | 38 | 36 |
| 215/45R17 | 32 | 32 |
| 215/45R17 | 32 | 32 |
Tire Pressure by Model Year
Select your Toyota Corolla model year to see the exact tire pressure specifications for that year, including any tire-size-specific variations.
| Year | Front PSI | Rear PSI |
|---|---|---|
| 2014 | 35 | 35 |
| 2015 | 35 | 35 |
| 2016 | 35 | 35 |
| 2017 | 35 | 35 |
| 2018 | 35 | 35 |
| 2019 | 35 | 35 |
| 2020 | 38 | 36 |
| 2021 | 38 | 36 |
| 2022 | 38 | 36 |
| 2023 | 35 | 33 |
| 2024 | 35 | 33 |
| 2025 | 35 | 33 |
| 2026 | 35 | 33 |
Toyota Corolla Tire Pressure by Trim
The Toyota Corolla is sold in the trims below. Cold inflation pressure can differ between trims — pick yours, or verify against the driver-side door jamb sticker.
| Trim | Years | Front | Rear | Tire Size |
|---|---|---|---|---|
| Corolla Hybrid LE | 2020-2026 | 35 PSI | 33 PSI | 195/65R15, 205/55R16 |
| Corolla Hybrid SE | 2023-2026 | 33 PSI | 30 PSI | 225/40R18 |
| Corolla Hybrid XLE | 2023-2026 | 35 PSI | 33 PSI | 205/55R16 |
| Corolla L | 2014-2022 | 38 PSI | 36 PSI | 195/65R15 |
| Corolla LE | 2014-2026 | 35 PSI | 33 PSI | 205/55R16 |
| Corolla LE Eco | 2014-2019 | 35 PSI | 35 PSI | 195/65R15 |
| Corolla S | 2014-2016 | 32 PSI | 32 PSI | 205/55R16, 215/45R17 |
| Corolla SE | 2017-2026 | 33 PSI | 30 PSI | 215/45R17, 225/40R18 |
| Corolla XLE | 2017-2022 | 35 PSI | 33 PSI | 205/55R16 |
| Corolla XSE | 2017-2026 | 33 PSI | 30 PSI | 215/45R17, 225/40R18 |
How to Check Tire Pressure on Your Toyota Corolla
Check cold (parked 3+ hours) with a gauge. 2014-2019 Corolla (E170) has a warning-light-only TPMS — the dash light is all you get, with no per-tire PSI readout. 2020+ (E210) shows per-tire PSI in the multi-information display: use the steering-wheel arrow keys to reach the gear icon, then Vehicle Settings > TPWS.
How to Reset the TPMS Light on a Toyota Corolla
2014-2019 (E170): the reset switch is inside the glove box, labeled SET — inside the box, not the fuel-pump cut-off button mounted under it. Inflate all tires to the door-jamb spec cold, turn the ignition ON with the engine off, then press and hold SET until the warning light blinks slowly 3 times. Wait a few minutes, then drive 10-20 minutes at 25-50 mph to finish. Plain reinflation usually self-clears after a few minutes of driving; if the light stays on, re-initialize with SET. 2020+ (E210): there is no physical button — on the meter display go to Vehicle Settings (hold OK to enter) > TPWS > Set Pressure, hold OK until the light blinks 3 times, then drive above 25 mph for 10-30 minutes. On either generation, a replacement sensor must have its ID registered with a TPMS/OBD tool (Techstream) before initialization — the button or menu alone is not enough.
If the light returns after a reset, re-check cold PSI on all four tires plus the spare, then inspect for a slow leak. Persistent warnings usually mean a faulty TPMS sensor (typical replacement cost: $50–$100 per wheel at an independent shop).
Frequently Asked Questions
What is the recommended tire pressure for a Toyota Corolla?
The recommended cold tire pressure for the Toyota Corolla varies by model year and tire size. Front PSI ranges from 32 to 38, and rear PSI ranges from 30 to 36, measured cold. Check the year table below for your specific model year, then verify against the driver-side door jamb sticker.
How do I reset the TPMS light on a Toyota Corolla?
2014-2019 (E170): the reset switch is inside the glove box, labeled SET — inside the box, not the fuel-pump cut-off button mounted under it. Inflate all tires to the door-jamb spec cold, turn the ignition ON with the engine off, then press and hold SET until the warning light blinks slowly 3 times. Wait a few minutes, then drive 10-20 minutes at 25-50 mph to finish. Plain reinflation usually self-clears after a few minutes of driving; if the light stays on, re-initialize with SET. 2020+ (E210): there is no physical button — on the meter display go to Vehicle Settings (hold OK to enter) > TPWS > Set Pressure, hold OK until the light blinks 3 times, then drive above 25 mph for 10-30 minutes. On either generation, a replacement sensor must have its ID registered with a TPMS/OBD tool (Techstream) before initialization — the button or menu alone is not enough.
Does the Toyota Corolla have a separate tire pressure for a performance or hybrid trim?
Yes — some Toyota Corolla configurations use different PSI values depending on tire size. The table above lists every distinct pressure. Owners of performance or hybrid trims should pay extra attention to even wear and re-check pressure weekly, since the wider or specialized footprint is more sensitive to pressure loss.
Why does my Toyota Corolla tire pressure read higher than 35 PSI after driving?
Driving heats the tires and raises the PSI reading by 2–4 PSI. The 35 PSI recommendation is a cold pressure measured before driving or after at least 3 hours parked. Never deflate to 35 PSI after driving — you'll end up under-inflated once the tires cool.
What happens if my Toyota Corolla tire pressure is too low?
Under-inflated tires increase rolling resistance, reducing fuel efficiency by up to 3%. They wear faster on the outer edges, generate excess heat that can cause blowouts at highway speeds, and reduce braking and handling performance. If your TPMS warning light is on, check your tire pressure as soon as possible.
Need a reliable tire pressure gauge? See our guide to the best tire pressure gauges →